Wednesday, September 30, 2015

Sound wave

What do you hang on the wall between two speakers? What will be the perfect picture?
I have to create a quilt for such place.
The idea is to show the sound wave between speakers.
And the most challenging decision is making it as a 3D quilt.
At the very beginning it was gathered strips only.


Then were plates and quilting.








And the final look comes.



The size is 40 x 26 inches.
Sold!

Thursday, September 24, 2015

The four seasons Wall hanging

 Two months ago I have a really interesting order to make a wall hanging that will match to the interior of a room. It was a real challenge because of mix of various materials and special spirit of the interior.
I decided on classical Black and White with fuchsia accent.
The four seasons always are good theme for improvisations so trees and fallen leaf are quite interesting directions to push my efforts.
In progress on my design wall:


I usually work with mini quilts or single blocks so my wall is narrow for entire top with boarders :)


For quilting I try the spiral for collecting all seasons and as reminiscence of tree annual rings.


I love using my walking foot. The quilting took me almost 2 hours - to short time for the quilt sized 33 inches square.
Are you interested in getting more fluent in using walking foot.
take the course at CRAFTSY Creative Quilting with Your Walking Foot


Saturday, September 5, 2015

Coloring mat for adults

Have you heard about the new anti stress therapy - coloring books for adults?
And especially Johanna Basford's Secret Garden.

I had to sew mats and wandering about design.
I have looking at my fabrics when found this one - IKEA designed print very similar to the coloring pages.


Immediately imagined a mat like coloring page.
Two hours later I have a finished mat.



Are you interested how to do? It is absolutely fun and easy.
Let's started!

1. Cut a piece 13 inches long selvage to selvage.

2. Then cut a rectangle 10x13 inches (left piece on the picture). The right one we will use for transfer the drawing lines and at the end as the back fabric..


3. Cut a white rectangle 10x13 inches and stitched both pieces right side together.
Iron the seam open an you have a top.

.
4. Now it is time to transfer the lines from the printed fabric onto the white one.
If you have LightPad to transfer the lines use it.
I usually use a window glass in daylight.
Get the right piece from Step 2 and tape it onto the glass.

5. Adjust the prepared top from Step 3 to fit the print so that you can see the complete drawings.


6. Now transfer some of the lines with Trick Marker self-erasing.

7. Cut a piece of batting bigger than the top, sandwich and FMQ with black thread.

8. Place a piece of fabric for back, stitch in the ditch and make a binding as usual.


Now you have a finished mat!

You can use any similar printed fabric with drawings if not have IKEA design.